Share this link via
Or copy link
(Inclusive of all taxes)
Product Warranty | : | 1 year |
Brand | : | Zoom |
KEY FEATURES
ZOOM H2N OVERVIEW Ideal
for versatile, immersive capture of musical ensembles and audio for VR, the
Zoom H2n portable handheld recorder with an onboard 5-mic array lets you record
high-resolution stereo or surround sound audio in the palm of your hand. Make aurally
exciting music tracks and create captivating sound beds with nothing more than
the H2n.
The
H2n's onboard 5-mic array opens the door to true stereo or surround sound
recording without external microphones. The built-in microphones—two form an
X/Y pair, while the other three are configured in a mid-side pattern—can be
used separately for X/Y or MS stereo recording, or combined to create 2- or
4-channel surround sound. A simple dial atop the grille grants effortless
switching between the four modes. Stereo/Surround Record Modes X/Y
mode utilizes two matched unidirectional mics set at a 90° angle (relative to
each other) for clear, phase-accurate capture with a tight stereo image. MS
mode employs one forward-facing mic and two side-facing mics to simultaneously
capture direct signal and ambience while providing optimal stereo-to-mono
compatibility. The H2n's internal MS decoder allows you to adjust the relative level
of the mic element before or after the recording process, effectively
manipulating the perceived stereo width. Thanks
to a 3.5mm stereo mini-jack input that supplies 2.5V plug-in power, the H2n can
accommodate an external condenser microphone such as a clip-on lavalier for
crisp, close-miked speech reproduction. Plugging in an external source to the
3.5mm jack overrides the onboard X/Y stereo mic, so no menu-based input
selection is required. Since the 3.5mm input also supports line-level signal,
you can route the output of a wireless microphone receiver into the H2n.
3.5mm Output for Hookup to a Camera or
Headphones The
3.5mm line/headphone mini-jack output features a dedicated volume control,
making it capable of feeding your camera/DSLR or a pair of headphones. A built-in
monophonic speaker on the back of the H2n makes it easy to review your
recordings to make sure everything has been captured properly. Powered via AA Batteries or AC Adapter Power
the H2n via two AA batteries, or plug it into a wall outlet with an AD-17 AC
adapter (available separately). Alkaline batteries can keep the H2n recording
at 16-bit / 44.1 kHz resolution for up to 20 hours. When using the H2n as an
audio interface, USB bus powering is possible. ZOOM H2N SPECS
|